XPAG engine rebuild kit contains all the required parts that you will need to carry out a professional rebuild of your engine.
These are all the parts that we use within our workshop when fully rebuilding an XPAG engine. They incorporate all of our up-rated products including improved cam followers, race quality big end nut & bolt kit and our own profile camshaft. Etc
If you were to purchase the following list of items separately it would cost in excess of £3,200.00
So buying it as a kit gives you a massive saving.
Please specify any changes that you may require when ordering.
We can also carry out the required machining, balancing and oil seal assembly/first fit if required.
| 291-600 | Gasket timing cover | 1 |
| 320-300 | Medium timing cover bolt | 3 |
| 320-310 | Long timing cover bolt | 2 |
| 320-260 | Short timing cover bolt | 2 |
| 120-750 | Front oil seal - lip seal | 1 |
| 433-418 | Rear crankshaft oil seal | 1 |
| 433-425 | Speedy sleeve | 1 |
| 320-265 | Bolt - Front of sump | 2 |
| 320-270 | Bolt - Centre of sump | 10 |
| 320-290 | Bolt - Rear of sump | 2 |
| 328-120 | Drain plug | 1 |
| 6K431B | Washer - oil drain plug | 1 |
| AAA5561 | Core plug - large | 2 |
| CA1056 | Core plug - small | 6 |
| 320-260 | Bolt - Dynamo adjusting link | 1 |
| 320-260 | Bolt - rear dynamo bracket to block | 2 |
| 320-260 | Bolt - front mounting plate | 2 |
| 291-800 | Gasket - front mounting plate | 1 |
| 290-600 | Side cover plate gasket | 1 |
| 433-340 | Sleeve nut - side cover plate | 3 |
| WF509 | Washer for side cover plate sleeve nut | 3 |
| 290-300 | Rocker cover gasket | 1 |
| 328-770 | Stud - rocker cover | 2 |
| 324-610 | Washer - rocker cover thumb nut | 2 |
| 433-310 | Rear cover plate - head | 1 |
| 290-800 | Gasket - rear cover plate | 1 |
| 323-180 | Cheese head screw - rear cover plate | 4 |
| 290-000 | Head gasket | 1 |
| 328-780 | Cylinder head stud | 10 |
| 311-200 | Cylinder head nut | 10 |
| 328-750 | Stud - water pump mounting | 2 |
| 311-100 | Nut - water pump stud | 2 |
| 320-290 | Bolt - water pump mounting | 2 |
| 434-240 | Water drain tap | 1 |
| WF509 | Washer - drain tap | 1 |
| CCEP1 | Engine spray paint - Maroon | 1 |
| 290-400 | Manifold gasket to head | 1 |
| 435-128 | Gear set - oil pump | 1 |
| 330-318 | Bush set driving gear housing | 1 |
| 327-050 | Key driving gear | 1 |
| 326-010 | Circlip driving gear | 1 |
| 435-090 | Shaft and gear | 1 |
| 435-130 | Shaft driven gear | 1 |
| 292-300 | Gasket - Oil pump to block | 1 |
| 320-160 | Oil pump bolt - short | 4 |
| 320-165 | Oil pump bolt - medium | 2 |
| 320-170 | Oil pump bolt - long | 2 |
| 324-978 | Washer set - Oil pump bolts | 1 |
| 329-530 | Ball relief valve | 1 |
| 329-080 | Spring relief valve | 1 |
| 324-790 | Washer - relief valve cap | 1 |
| 329-090 | Spring , by pass in block | 1 |
| 329-530 | Ball, by pass in block | 1 |
| 291-300 | Gasket - oil pick up in sump | 1 |
| 7H1948 | Seal - bolt for oil filter canister | 1 |
| 435-465 | Banjo bolt - round | 1 |
| 435-500 | Banjo bolt - flex pipe adapter | 1 |
| 324-760 | Washer, banjo bolt | 4 |
| 420-088 | Piston set with rings. Solid skirt, lightweight. | 1 |
| 423-030 | Inlet valve 36mm | 4 |
| 423-045 | Exhaust valve - stellite faced 34mm | 4 |
| 423-215 | Silicon bronze valve guide, Inlet | 4 |
| 423-225 | Silicon bronze valve guide, Exhaust | 4 |
| ADU4905 | Oil seal - improved | 8 |
| 451-170 | Rocker shaft | 1 |
| 326-110 | Clip rocker shaft | 2 |
| 320-330 | Bolt - Rocker pedestal 8mm | 4 |
XPAG engine rebuild kit
- Product Code: XPAGKITTC
- Availability: In Stock
-
£3,000.00
- Ex Tax: £2,500.00